System bus interface

• Single-slot PCIe Gen2 x8 bus

• Half-length, half-height card

• Multiple cards allowed in a system IP encapsulations

• IP encapsulation according to ST 2022-6, ST2110-10, ST 2110-20, ST 2110-30, and ST 2110-40

• Hitless Protection according to ST 2022-7

• Discovery and Registration according to AMWA NMOS

Video inputs and outputs

• up to 4 inputs and 4 outputs:

   - 4 inputs and 4 outputs on primary SFP+

   - 2 inputs/2 outputs per SFP+

• Serial digital component 4:2:2 video in accordance with ST 259M, ST 292M, and ST 425-AB

   - 480i (NTSC) at 29.97 fps

   - 576i (PAL) at 25 fps

   - 1080i at 25, 29.97 and 30 fps

   - 720p at 50, 59.94 and 60 fps

   - 1080p/PsF at 23.98, 24, 25, 29.97 and 30 fps

   - 1080p at 50, 59.94 and 60 fps

• UHD (UltraHD) input and output (using 2 SFP+ cages):

   - 3840x2160p at 59.94, 50 and 60

   - 3840x2160p at 29.97, 25, 24 and 23.98

• 8-bit and 10-bit YUV 4:2:2

• Inputs and outputs can be a video or key, where key inputs and outputs can be expanded and inverted

• Simultaneous input and output of different video standards

• Auto-detection of input video standard

• Independent horizontal and vertical timing presets for each video output

• Proc amp controls at inputs

• Color space conversion at input (YUVA to RGBA)

• Color space conversion at output (RGBA to YUVA)

Ancillary data inputs and outputs

• Generic support of VANC with select HANC packets (ST 12M-2 and ST 352) in ST 2022-6 encapsulation

• Generic support for ST 291-1 ancillary data in ST2110-40 encapsulation Audio inputs and outputs

• Up to 16 channels of audio per video flow supported in accordance with ST 272M A, B and C (SD) and ST 299M (HD) for ST 2022-6 encapsulations

• Up to 16 channels of AES67 PCM audio per video flow for ST 2110-30 encapsulation

• 48 kHz sampling

• Supports 16-, 20- and 24-bit audio streams

• Built-in frame synchronizers

• 4 frame synchronizers

• Timebase of inputs corrected to the genlock source

• 16 channels of audio resampling per input

• Can be optionally disabled

Motion adaptive deinterlacer

• Pixel based operation

• Temporal and spacial-based motion estimation

• Anti-Aliasing filtering

• Telecine detection and film restoration

• Video over film detection

• Up to 4 channels of 1080i30 to 4 channels of 1080p60 processing

• 10-bit processing

Onboard scaler

• Pixel-based scaling, positioning, and cropping

• Down, up and cross scaling

• Downscaling of up to 8 channels of 1080i30

• Cross scaling of up to 4 channels of 1080i30

• Supports custom resolutions and broadcast resolutions up to UHD

• 8- and 10-bit surfaces

• YUV 4:2:2 and YUVA 4:2:2:4 surface formats

• Aspect ratio and colorimetry conversion between SD and HD

• Ancillary data conversion between SD and HD

Onboard compositor

• Programmable in single or multiple compositor configurations

• 8- and 10-bit video

• Up to 8 layers of 1080i30 compositing or 2 layers of UHD@p60 compositing

• Full-blend and half-blend mixing

• Shaped or unshaped video compositing

• RGBA to YUVA color space conversion

• Logo input support with pixel-based positioning In-line live video and audio mixer

• Up to 4 live mixers

• Zero frame delay

• 8- and 10-bit video

• Downstream mixing of live video with host buffers

• Mixing of 16 tracks of live embedded audio with host audio

Genlock time base

• Genlock over IP as per ST2059-2

• Best master clock algorithm for 2 grandmasters

• Analog blackburst reference (tri-level or bi-level)

• Optional latching termination

• Auto detection of genlock standard 

IP interface

• 10 Gigabit Ethernet (GbE) IEEE 802.3ae (optical)

• MSA compatible SFP+ transceivers supported

• Control and management protocols

   - Multicast/Unicast

   - IGMPv2 and IGMPv3 support

   - Static IPV4 addresses

   - DHCP

   - Generic packet interface for in-band control

Failsafe

• Watchdog circuitry

• Intelligent IP bypass 

100 Class 

 - Does not have software codec, or software effects. 

XMIO3/E4/100  - 4 reconfigurable video I/O with SMPTE ST 2022-7

XMIO3/E/100   - 8 video I/O (4 inputs and 4 outputs) with SMPTE ST 2022-7 

500 Class 

- Includes DV25, DV50, MPEG-2 I-Frame 422/4224 codec,  D10 codecs, MPEG-2 IBP codec(422/420 Main Level and High level), HDV, DVCPRO HD, AVC-Intra, XAVC, H.264 encoding and decoding (422/420 8bit and 10bit), and software effects.

XMIO3/E4/500  - 4 reconfigurable video I/O with SMPTE ST 2022-7

XMIO3/E/500   - 8 video I/O (4 inputs and 4 outputs) with SMPTE ST 2022-7 

550 Clase 

 -  Includes codec and effects in 500 class plus ProRes codec.

XMIO3/E4/550  - 4 reconfigurable video I/O with SMPTE ST 2022-7

XMIO3/E/550   - 8 video I/O (4 inputs and 4 outputs) with SMPTE ST 2022-7